Kathrein UFS 946/CI+, Руководство по эксплуатации

Страница: 9 / 124

9
Updating the receiver software
Your receiver is equipped in the factory with the latest software version. We are, however, constantly
working on adapting the software to the wishes of our customers and to developments in technology.
Further information on this will be found in the sections “Mainmenu - Service Menu”.
The information in these operating instructions was correct at the time of going to print. We reserve
the right however to make changes at any time and without prior notice. If new software is released for
your receiver, and this affects the information in the operating instructions (e.g. changes to the menus
and/or functions), if we believe it necessary we will make available new operating instructions for
download at “www.kathrein.de”.
Make a note of the receiver's basic settings (these are set during fi rst installation) so you can restore
them if necessary!
Please be aware of your responsibility towards your fellow human beings! Keep these
instructions for any questions that arise later, and if the receiver passes to another owner,
pass them on to the new owner.
Please see the UFS 946/CI+ Operating Instructions – Part 1, “Connection and set-up” for details on how
to connect the receiver and carry out fi rst installation.
The following description of the menus and functions assumes that the UFS 946/CI+ has been correctly
connected and installed (as detailed in the operating instructions part 1 “Connection and set-up”).
Other
Safety instructions - important notes
Network function
To connect the receiver to the network via the PC/laptop, you must have unrestricted rights
(administrator rights) for your PC/laptop and on your network. For this refer to the section “Mainmenu”,
“Interface Setup”, “Ethernet Settings”.