Kathrein UFS 946/CI+, Руководство по эксплуатации

Страница: 56 / 124

56
Mainmenu - Channel Search
Channel scan with service ID
After calling up the menu you will see
the following on-screen display:
The

buttons allow you to select
different sets of parameters for the search.
Satellite
Use the

buttons to select the satellite that is transmitting the channels to be searched. By
pressing the

button at this point, you can view a list of the installed satellites. Use the

buttons
to select the satellite you want and confi rm with the

button. Make sure your reception system is
aligned to this/these satellite(s).
Transponder Frequency
Use the

buttons (transponder frequency already saved) or the number pad (transponder
frequency not yet saved) to select the transponder frequency on which the channel being sought
is transmitted. By pressing the

button at this point, you can view a list of the transponders
stored for the selected satellite. Use the

button to select the desired transponder and
confi rm with the

button. At the bottom right of the on-screen display, the receiver shows the
current signal strength and signal quality of the selected transponder.
The “Polarisation” and “Symbol Rate” options need be specifi ed only if the transponder has yet
to be saved.
Polarisation
Press the

buttons to select the correct polarisation (horizontal or vertical).
Symbol Rate
Use the

button or the number pad to enter the applicable symbol rate.
Service ID
Use the number pad to enter the service ID of the channel to be searched for.