52
Mainmenu - Channel Search
Automatic channel search
After calling up the menu you will see the
following on-screen display:
The
buttons allow you to select
different sets of parameters for the search.
Satellite
Now use the
buttons to choose between the individual satellites you have set up, or select the
setting “All”. If “All Satellites” is selected, all the individual satellites you have set up will be searched
for new channels. Make sure your reception system is aligned to this/these satellite(s).
Channel Search Mode
Use the
buttons to select the type of channels you want to search for. You have three options:
- “free & scrambled”
All channels are searched for
- “only free”
Only free-to-air channels are searched for
- “only scrambled”
Only encrypted channels are searched for
To view encrypted channels you need an appropriate CI (Common Interface) module and a
valid Smartcard together with a valid subscription to the relevant Pay TV provider.
Network Search
Use the
buttons (On/Off) to select whether a network scan should be performed. If you set
the network search to “Off”, only the factory default transponders for the satellite(s) you previously
selected will be searched for new as yet unsaved channels. If you set the network search to “On”, the
transponder network enables additional transponders that have not yet been stored to be located.
These are then stored and searched for new channels in the same way as the existing transponders.
Once you have defi ned all the settings, use the
buttons to switch to the “Start Search”
selection fi eld and confi rm the start of the search using the
button.
Содержание UFS 946/CI+
Страница 122: ...122 For your notes...
Страница 123: ...123 For your notes...
