Kathrein UFS 946/CI+, Руководство по эксплуатации

Страница: 94 / 124

94
Operation from the front panel (without remote control)
Software Update by USB
Updating over the USB port will require a blank USB stick with FAT32 format
which only contains the operating software or channel list you wish to load. It is
essential that the operating software to be loaded is stored on the USB stick
under the following directory structure:
Main folder: kathrein
Subfolder:
∟
ufs946
You can also download the updates from the Internet. The address is: www.kathrein.de
1. Switch the receiver to standby mode
2. Switch off the receiver at the main switch at the rear of the unit
3. Now connect your USB stick (with the new operating software, in the required directory structure) to
the receiver using the USB port on the receiver
4. Keep the “+” button pressed, and switch the receiver on again, using the main switch at the rear of
the unit
The receiver will now scan the connected USB stick. You can now release the “+” button again. The
software update is automatically performed by the receiver. The receiver restarts automatically when
the software update is complete.
You can now remove the USB stick from the receiver.