Kathrein UFS 924, Руководство по эксплуатации

Страница: 44 / 64

44
Connection and setup
This menu can be found in the receiver
under: Main menu - Interface set-up -
Ethernet settings. After calling up the menu
you will see the following on-screen display
(example):
The Ethernet interface used in the
receiver is a 10/100 base T Ethernet
interface.
If you want to connect your receiver to a DHCP server/router, use the

buttons to select the “On”
setting. If you wish to connect your receiver to a PC or laptop, the DHCP setting must be “Off”.
DHCP “On”
(DHCP server/router)
DHCP “Off”
(Hub/Switch/Direct
connection to PC or laptop)
Individual items are selected using the

buttons. Changes to the current settings can be made
using the

buttons or the numeric keypad.
An Internet connection is required for the use of the Red Bull MEDIA HOUSE PORTAL!
These settings should not be defi ned unless the receiver is linked into a network (e.g. for
Internet access) or is linked to a PC/laptop using a cross-over network cable.
Refer to our network function connection examples at the end of these instructions
as well as the guidance we provide on this topic on the Internet at “www.kathrein.de”
“Service”
→
“Software and Download”
→
“Receiver”
→
“UFS 924”.
To connect the receiver to the network via the PC/laptop, you must have unrestricted rights
(administrator rights) for your PC/laptop and on your network.
If you experience problems connecting the receiver to your network directly or via your PC/
laptop, consult your PC or network specialist.
Network/Internet access