Kathrein UFS 924, Руководство по эксплуатации

Страница: 26 / 64

26
Connection and setup

Rotate to the East step by step

Start slow rotation to the East
Set the turntable so that both of the bars “Signal-Strength” and “Signal-Quality” on the right of the screen
show the highest available percentage values.
When you have reached the best possible signal strength, move to the “Store actual position” line and
press the

button. The receiver will now save these values for this satellite and skip automatically to
the setting for the next satellite.
If you have selected more than one satellite for Tuner 1, def ne the settings as just described for the f rst
satellite, for the second satellite and for any other selected satellites.
When you have completed all settings for the selected satellites, press the

button.
When you have completed all settings for Tuner 1, press the

(green) button.
If necessary, the receiver will automatically skip to the settings for the second tuner (assuming that for
the second tuner you selected the type of connection “Separated” and set the signal con f guration to
“Different from Tuner 1”). If this is the case, you should now de f ne the settings for the second tuner in
the same way as you did for the f rst tuner.
Once you have completed the settings for both tuners and the satellites assigned to them, the receiver
will automatically display the screen for the channel search. Continue the f rst installation with the
“Channel Search” section.