Kathrein UFS 924, Руководство по эксплуатации

Страница: 39 / 64

39
Connection and setup
LNB Frequencies (MHz):
Enter the LNB frequencies (Low/High/Limit) using the number pad. Now use the

button to save the
new values.
Test-Transponder:
Select the “Test-Transponder” f eld. Here you can select a transponder for checking whether your settings
are correct using the signal strength bar and signal quality bar.
When you have completed all settings for the selected satellites, press the

button.
If you have selected two satellites, conf gure the settings as just described for the f rst satellite for the second
satellite.
When you have completed all settings, press the

(green) button.
When you have completed all of the settings, you will automatically see the on-screen display for the
channel search. Continue the f rst installation with the “Channel Search” section.