Kathrein UFS 924, Руководство по эксплуатации

Страница: 29 / 64

29
Connection and setup
On the “Satellite” line select the satellite whose settings you wish to edit.
Satellite:
Select the desired satellite using the

buttons. Alternatively you can press the

button to view
a list of all satellites which you have previously selected, then select the required satellites from this list.
LNB Type:
If your reception system does not have a universal LNB, use the

buttons to select the
LNB types that are used in your reception system. You can choose from the following LNB types:
- Universal
- Simple or
- User-def ned
If you do not use a Universal LNB, press the

button. You can now de f ne the settings for your
LNB type (simple or user-def ned).
LNB Frequencies (MHz):
Enter the LNB frequencies (Low/High/Limit) using the number pad. Now use the

button to save the
new values.
Test-Transponder:
Select the “Test-Transponder” f eld. Here you can select a transponder for checking whether your settings
are correct using the signal strength bar and signal quality bar.
If you have selected more than one satellite for Tuner 1, def ne the settings as just described for the f rst
satellite, for the second satellite and for any other selected satellites.
When you have completed all settings for the selected satellites, press the

button.
When you have completed all settings for Tuner 1, press the

(green) button.
If necessary, the receiver will automatically skip to the settings for the second tuner (assuming that for
the second tuner you selected the type of connection “Separated” and set the signal con f guration to
“Different from Tuner 1”). If this is the case, you should now de f ne the settings for the second tuner in
the same way as you did for the f rst tuner.
Once you have completed the settings for both tuners and the satellites assigned to them, the receiver
will automatically display the screen for the channel search. Continue the f rst installation with the
“Channel Search” section.
Refer to the documentation for
your LNB or seek assistance
from a specialist engineer.