Kathrein UFS 924, Руководство по эксплуатации

Страница: 41 / 64

41
Connection and setup
Network Search (NIT)
Use the

buttons (On/Of f) to select whether a network search should be performed. If you set
the network search to “Of f”, only the factory default transponders for the satellite(s) you previously
selected will be searched for new as yet unsaved channels. If you set the network search to “On”, the
transponder network enables additional transponders that have not yet been stored to be located. These
are then stored and searched for new channels in the same way as the existing transponders.
When you have completed all settings, press the

(green) button. The following displays appear at f rst
(example):
The receiver independently updates
the ASTRA channel list *
) (LCN list)
stored in the device. This operation
may take several minutes.
*
)
The ASTRA channel list is a channel
list broadcast by ASTRA. It is used
to update the channel list stored on
the receiver. See also the Operating
Instructions Part 2, section entitled
“Mainmenu - Channel Search”, “LCN
(Update ASTRA channel list)”.
To view encrypted channels you need an appropriate CI (Common Interface) module and a valid
Smartcard together with a valid subscription to the relevant Pay TV provider.