Kathrein UFD 560, Руководство по эксплуатации

Страница: 20 / 52

Videotext/Subtitle - program selection
20
You can only receive these channels using a CA module and
a smartcard.
If there is a CA module in the CI slot that is not correct for this channel
then you will also receive a similar message, depending on the res-
pective module.
Another way of selecting another program is by pressing the

-
button. The TV channel list is then displayed (refer to Channel list -
RADIO/TV page 18):
Selecting the TV program by entering a number
When viewing a program, you can select another TV program by entering
the program number. Use the numerical

...

-buttons to enter
the number of the program.
Switching over to a radio program
To do this, press the

-button on the remote control and the
receiver then switches to the last received radio program. The LED
display shows a small “r” together with the number of the program.
Note: The screen goes blank (dark) after a few seconds!
You can return to the PV program using the same button or by
pressing

. The screen then shows the corresponding details for
TV-channel reception.
The radio program is selected and the radio channel list is called up in
identical fashion to that for TV programs.