Safety instructions
10
Mains supply
Caution!
Caution! Operate the receiver only with a mains voltage of 230 V/50 Hz.
First connect the antenna and the television set, before connecting the
receiver to the mains power supply and switching it on.
Extended absence/
thunderstorms
Notice!
Always switch the unit off via its mains switch located on the left on
the front panel during periods of extended absence or at the onset
of thunderstorms. This also applies to any other equipment which is
connected to the receiver.
However, take into account any possible timer programming, and
switch the unit on again in good time prior to the recording time.
Important notes for installation and the place of installation.
Place of installation
Notice!
Every electronic unit generates heat. The rise in temperature, howe-
ver, lies within a safe range. Slight color changes may occur to sen-
sitive furniture surfaces and veneers over the course of time due to
the constant effect of heat. In conjunction with treated furniture sur-
faces, the units rubber feet can, likewise, give rise to changes in color.
Where necessary, place the unit on a suitable pad.
Ventilation
Notice!
The heat which is generated in this unit is dissipated quite adequately.
Never install the receiver in a cabinet, shelf or rack with inadequate
ventilation. Never block the cooling slots on the unit.
Do not place objects on top of the unit. Maintain a clearance of at least
10 cm above the unit, so that the heat generated within the unit can
disperse without obstruction.
Moisture,
exposure to sunlight, heat
Notice!
Protect the unit against moisture, drips and splashing.
Do not place the unit close to radiators nor expose it to direct sunlight.
Содержание UFD 560
Страница 1: ...Operation Manual DVB C Receiver UFD 560 560S with Common Interface ...
Страница 2: ......
Страница 50: ...Technical appendix 50 Connection example ...