Kathrein UFD 515, Руководство по эксплуатации

Страница: 54 / 78

Setting system parameters
A/V mode
Here, you use the
-+
buttons to select the type of video signal which
is present on the Scart socket. Select the signal which your TV set is
able to process.
Observe the operating instructions of your television set!
·
·
·
FBAS –composite baseband signal (colour-/picture-/blanking-
/synchronising-signal)
RGB – red-/green-/blue-signal
Y/C – S-VHS signal (luminance/chrominance).
Confirm by pressing
L
two times.
Installation menu
You should not change the following settings without good reason as
they represent factory settings or operational settings that are adapted
to your receiving system.
New settings are only required when changes or expansions are
made to the receiving system.
The main menu consists of the following submenus:
Select the "Installation" menu with the menu button
M
, the
ou
buttons in the main menu and
O
. If set, you must also
enter the password. Select the menu points with the
ou
buttons.
LNB configuration
The first submenu is the "LNB configuration". Press
O
to open this
menu. Normally, you should not make any changes in this submenu.
Before making any changes, however, you should make a note of the
settings in the form provided at the end of this User's Guide.
Your receiver is set at the factory to the satellites of the ASTRA and
54