Kathrein UFD 515, Руководство по эксплуатации

Страница: 43 / 78

Adding and removing satellites
In the next step, move with
o u
to e.g. the entry „User1“.
After pressing the
-
or
+
button, you are asked if you want to add the
satellites.
Confirm it with
O
.
The following message appears
You can now make the respective entries to your receiving system in
the corresponding positions using the
o
,
u
and
-
or
+
buttons
and exit the menu by pressing
L
three times. At the same time the
new station data is stored.
Entering a satellite name
You can change the satellite name in the LNB configuration menu
using the number buttons. Refer to section "operating instructions" for
information about the exact procedure.
Removing a satellite
To remove a satellite, select the "LNB configuration" menu, move the
cursor bar with
o
or
u
and confirm by pressing the
-
or
+
button. You will now be asked whether you wish to remove the
satellite. You can either confirm your selection with
O
or cancel
with
L
.
43