Kathrein UFD 515, Руководство по эксплуатации

Страница: 24 / 78

Programme selection
i
button. The radio programme list is now displayed. The upper
right-hand column provides information relating to the received
satellites, its transmission frequency, the polarisation, the symbol rate,
the bouquet and the scrambling. The programme position, the
programme name, and type of reception signal (free-to-air/scrambled)
are provided on the left. In the upper right-hand field you find the
menu for the menu/ channel setting. Use the
ou
buttons to
switch to the next programme, and with
-+
buttons to skip to the
neighbouring page. The programme selection is confirmed by
pressing
O
.
You can also select the desired programme with the numerical
buttons.
Press the
L
button to exit the programme list and remain in the
already set programme.
Selecting a radio programme by number entry
You can select a different radio programme during a running radio
programme by entering the programme location number. Use the
number buttons
1
to
0
for the purpose of entering the
programme location number.
Example You wish to select the radio programme "DLR-Berlin". This
programme is stored under the programme location number 15. (The
order of radio programmes is defined in the programme memory, and
therefore this only serves as an example.)
To select this programme, press the numbers
1
and
5
one
after the other. The receiver waits for about 3 seconds for entry of the
next number.
Follow the same procedure for all other programmes – i.e. also
programmes with three-digit programme location numbers. You do not
have to enter leading zeros, unless for accessing teletext.
24