Kathrein UFD 515, Руководство по эксплуатации

Страница: 11 / 78

Command of remote control
Command of remote control
The remote control features 2 command sets, making it possible to
operate 2 receivers independently of each other in one room (not
together with a twin receiver).
Note
For this purpose, program one receiver on the command set 1 and the
second receiver on the command set 2.
Switch on receiver 1 and receiver 2 off with the mains switch
Press and hold the
A
button.
Enter "901" with the number buttons.
To adopt the code, press the
e
button to switch receiver 1 to
standby and then switch off the device with the mains switch.
Put receiver 2 into operation again.
Press and hold the
A
button.
Enter "902" with the number buttons.
To adopt the code, press the
e
button to switch receiver 2 to
standby and then back into operation. Now switch on receiver 1 again.
Press and hold the
A
button.
Enter "903" with the number buttons.
When carrying out the first two settings, the remote control must be
directed at the respective receiver (when switched on).
By pressing the
A
button, you can now switch between the two
command sets A and B (toggle function) and alternately operate both
receivers.
Command set 1 is always active as the on-delivery setting.
If you are operating only one receiver and the active command set is
switched over by mistake so that this receiver can no longer be
operated, the remote control can be easily switched back to command
set 1. The procedure is already described above
.
11