Kathrein UFD 515, Руководство по эксплуатации

Страница: 30 / 78

Sound settings
Sound settings
Setting the volume
Set the required volume level by pressing the
-+
buttons on the
remote control of the receiver. A bar indicator is displayed on the
screen to show the set volume.
Stereo and two-channel sound reproduction
The channel identifier, which is displayed by pressing the
O
button,
shows the set sound reproduction. (Depending on the direction of the
sound wave symbols –below the time of day –the sound setting may
be mono left, mono right or stereo. The number indicates the number
of transmitted sound channels). The programme title is shown in the
box on the right.
Press the
s
button to call up the audio menu for sound and
language selection. You can now make the required settings, e.g.
language selection, provided the corresponding data is contained in
the reception signal (sound track), Dolby Digital (5.1 CH). Select the
menu points by pressing the
ou
buttons and select the
required setting with the
-+
buttons. Press the
s
button once
again to exit the menu.
If captions are transmitted, you can select the bar caption language
with the
-+
buttons and confirm by pressing
O
.
AC3
The receiver can process sound transmissions in AC3 format (Dolby
Digital) providing you with the opportunity of listening to cinema sound
quality in your living room. The digital sound output is provided for this
purpose. You will need to connect it to a corresponding system.
Please refer to the instruction manual of your Dolby Digital
system.
30