Kärcher MC 250, Руководство пользователя

Страница: 54 / 298

54 English
–
Grey pointer: PTO on the right
3
Fuel level indicator
4
Hydraulic oil Temperature
5
Working speed
6
Engine speed
7
Engine coolant temperature
8
Rear attachment drive triggering level in %
9
DPF regeneration display
10
Driving direction indicator
11
Mileage
12
Fresh water tank (only with optional sweeping attach-
ment kit)
13
Recycling water tank (only with optional sweeping at-
tachment kit)
14
Operating hours counter
15
Working hours meter
7.11.4Select steering (2-wheel / 4-wheel)
Transport mode and 2-wheel steering are automatically
selected when starting the engine.
In working mode (PTO on), the 4-wheel steering can be se-
lected.
1
Steering mode display (2-wheel / 4-wheel)
2
Function key F10
1. Press function key F10.
2. Turn the steering wheel over the centre position (refer-
ence point). If the display turns green, the steering mode
is activated.
7.11.5Reversing camera
The reversing camera is located at the rear of the vehicle.
When reversing, the camera automatically turns on and
appears in the display.
몇
WARNING
The reversing camera is no substitute for an aware-
ness of the surroundings
Always pay attention to the surroundings when reversing.
Ensure no persons, animals or objects are located in the
manoeuvring range.
7.11.6Bridging the seat contact switch
Note
Is required when performing work where the driver must
leave the driver's seat, e.g. with the manual suction hose
(option) or high-pressure cleaner (option).
1. Travel direction selector switch to the NEUTRAL posi-
tion.
2. Activate the hydraulic system (PTO on).
3. Press function key F4 on the display.
The "Seat contact switch overridden" warning symbol
appears on the display.
The seat contact switch is now bridged and the PTO re-
mains active.
7.11.7Symbols on the display
● Green indicator lights are indications.
● Orange indicator lights are indications of errors or pend-
ing switchovers of operating states:
a It is possible to continue driving with appropriate cau-
tion.
b Seek the help of a specialist.
● Red indicator lights are errors and safety-related warn-
ings.
a Read the operating instructions!
b Do not drive further!
c Seek the help of a specialist.
The following indicator lights can be shown on the display.
Parking light
Driving light
High beam
Driving direction indicator
Trailer indicator light
Crossroads function active
AUX X floating function active
AUX Y floating function active
AUX X and Y floating function active
Function 99 dB(A) active
Reversing camera active
2-wheel steering activated