Kärcher MC 250, Руководство пользователя

Страница: 45 / 298

English 45
4.11 Position of the symbols on the vehicle
Note
Immediately replace illegible or absent symbols.
4.12 Safety devices
Safety devices protect the user and may not taken out of
operation or functionally circumvented.
Adhere to the safety instructions in the chapters!
4.12.1Start inhibitor
Requirements for starting the engine:
● Driver is sitting on the driver's seat
● Neutral position of the travel direction selector switch
–
If the travel direction selector switch is in the forward
or reverse direction when starting the engine, the en-
gine can still be started, but driving is only possible if
the direction switch is first brought to the neutral posi-
tion.
● Operate the battery disconnector relay switch. See "Bat-
tery disconnector relay switch" chapter.
1
Battery disconnected (vehicle starting disabled)
2
Battery activated (vehicle can be started)
4.12.2Seat contact switch
When the driver's seat is vacant:
● The vehicle cannot be driven.
● The front PTO cannot be switched on or off.
4.12.3Parking brake
The parking brake requires hydraulic pressure to release.
The brakes are automatically actuated when the engine is
switched off.
The parking brake is also applied when the engine is run-
ning and the travel direction lever is in the NEUTRAL posi-
tion.
Note
The "Parking brake applied" warning light in the multifunc-
tion display lights up when the parking brake is applied.
4.12.4Driver cabin
The operator is protected from lightning strikes when sit-
ting in the driver cabin.
The driver cabin has a roll-over protection structure
(ROPS), which prevents rolling over after tipping over.
The driver cabin does not have a structure providing pro-
tection from falling objects (FOPS).
The driver cabin does not have a structure providing pro-
tection from falling objects (OPS).
Always use the safety belt.