Page 90 of 101
DWG ID: 181-0101-00A
Date: 2003-09-26
password string. If you fail in three attempts, the TALON will disconnect, and will not
accept another connect request for 15 min.
SCRAMBLE { ON | OFF | FEC }
default OFF
When set to ON, transmit data is scrambled. When set to FEC, transmit data is scrambled
with FEC (forward error correction, or “redundant bits”).
SCREENL n
(n = 0 - 255)
default 0
This value is used to format what is sent to your terminal. A “CR” sequence is sent to the
terminal at the end of a line when n characters have been printed. A value of zero inhibits
this action.
See also: autolf
SENDPAC n
(n = $00 - $FF)
default $0D <Ctrl+M> (CR or ENTER)
This command specifies a character that will force a packet to be sent in Convers Mode.
In the Convers Mode, packets are sent when the SENDPAC character is entered or when
PACLEN is achieved.
See also: cpactime, cr
SLOTTIME n
(n = 0 - 255)
default 10
n specifies the amount of time, in 10 millisecond increments, between successive tries of
the persistence algorithm.
See also: persist
START n
(n = $00 - $FF)