Page 8 of 101
DWG ID: 181-0101-00A
Date: 2003-09-26
3.6
Important Information
READ THIS SECTION BEFORE INSTALLING THIS KANTRONICS PRODUCT
This product contains SOFTWARE in FLASH Memory, which is protected by both
United States copyright law and international treaty provisions.
If you install or use this product, you are bound by the terms of the SOFTWARE license
shown below. If you do not wish to be bound by such license, return the (unused)
complete product package to your supplier for refund. The supplier may deduct
restocking/re-packaging costs.
3.7
License Agreement
3.7.1
License
In consideration of payment of the License Fee, which is included in the price of the
product, the Licensor Kantronics Company, Inc. (Kantronics) grants (you) a non-
exclusive right to use the SOFTWARE and associated documentation. No ownership
rights to the SOFTWARE or its Documentation are transferred from Kantronics to you.
3.7.2
Term
This License Agreement is effective until terminated. You may terminate this Agreement
by returning or destroying the unit and destroying the documentation. You may not rent
or lease the SOFTWARE, but you may transfer the SOFTWARE and accompanying
written materials on a permanent basis provided you retain no copies and the recipient
agrees to the terms of this Agreement. Kantronics may terminate this Agreement without
notice if you violate any terms or conditions of the agreement. In the event of termination
of the Agreement, provisions relating to Kantronics' disclaimers of warranties, limitation
of liability, remedies, or damages and Kantronics' proprietary rights shall survive.
3.7.3
Object Code
The SOFTWARE is delivered in object code only. You shall not reverse compile or
otherwise reverse engineer the SOFTWARE.
3.7.4
Limited Warranty
This product is covered by the standard Kantronics Company, Inc. Limited Warranty.
3.7.5
General
This License Agreement constitutes the complete Agreement between you and
Kantronics. The SOFTWARE and/or Documentation may not be exported or re-exported
