![background image](http://html2.mh-extra.com/html/kantronics/talon-udc-series/talon-udc-series_user-manual_3412850068.webp)
Page 68 of 101
DWG ID: 181-0101-00A
Date: 2003-09-26
See also: disconnect
DELETE n
(n = $00 - $FF)
default $08 <Ctrl+H>
This command defines the character to be used as the delete character. When this
character is typed, the last input character is deleted. The most common settings are $08
(backspace) or $7F (delete).
See also: bkondel
DIGIPEAT {ON | OFF | UIONLY}
default OFF
When ON, this unit will retransmit any packet it receives that has its MYCALL, or
MYALIAS, in the digipeat address field. Each station included in the digipeat list relays
the packet in the order specified in the address field. Digipeating takes place concurrently
with other TALON operations and does not interfere with normal connected operation of
the station. To disable digipeat operations (via MYCALL, or MYALIAS) set this
command to OFF.
If UIONLY is selected, the TALON will digipeat UI frames (unconnected information)
only.
See also: hid, myalias, mycall
DISCONNE
Immediate
When given without options, “disconnect” will initiate an immediate disconnect request
on the current I/O stream. A successful disconnect results in the display of “***
DISCONNECTED”. If the RETRY count is exceeded while waiting for the connected
station to acknowledge, the TALON moves to the disconnected state on that stream.
Entering a second Disconnect command before RETRY has expired will result in an
immediate disconnect on your end, but may leave the other station thinking it is still
connected to you. Disconnect messages are not displayed when the TALON is in
Transparent Mode. Other commands may be entered while a disconnect is in progress.
See also: dbldisc, newmode, retry, and status