Kannad AF INTEGRA, Руководство по установке

Страница: 36 / 60

INITIAL INSTALLATION MANUAL
AF INTEGRA / AF-H INTEGRA
PAGE: 32
JUN 01/2011
• Stop transmission:
- either on ELT: OFF or ARM position;
- or on the Remote Control Panel: press TEST and RESET (the ELT shall
be in ARM position).
- continue to listen to 121.5 MHz for a few seconds to ensure that the ELT
does not continue to transmit after the test is terminated.
IMPORTANT: If the ELT operates for approximately 50 seconds, a 406
MHz signal is transmitted and is considered valid by the satellite system.
At the end of the first power up procedure, switch the ELT to ARM.
The ELT is now in stand by mode and ready to be activated:
• either automatically by G-Switch sensor if a crash occurs;
• or manually by Remote Control Panel.
Note : switching to ON directly on the ELT front panel will also activate the
ELT.