Kannad AF INTEGRA, Руководство по установке

Страница: 34 / 60

INITIAL INSTALLATION MANUAL
AF INTEGRA / AF-H INTEGRA
PAGE: 30
JUN 01/2011
Remark: The number of flashes gives an indication of the faulty
parameter detected during the self-test.
B. RCP operational tests
Check correct operation of RCP LED
annunciator by switching ELT and RCP as
described in the sequential procedure
Figure
23: RCP LED operation (with ELT switch in the
"ARM" position).
Figure 23: RCP LED operation
3+1 LOW BATTERY VOLTAGE
3+2 LOW RF POWER
3+3 FAULTY VCO LOCKING (FAULTY FREQUENCY)
3+4 NO IDENTIFICATION PROGRAMMED
3+5 FAULTY VSWR (EXT. ANTENNA)
3+6 GPS SERIAL LINK (ELT internal check)
If self-test fails, contact the distributor as soon as possible.
Unless a waver is granted, flight should be cancelled.