Kannad AF INTEGRA, Руководство по установке

Страница: 6 / 60

INITIAL INSTALLATION MANUAL
AF INTEGRA / AF-H INTEGRA
PAGE: 2
JUN 01/2011
The most effective external antenna configuration is on top of the fuselage, aft
of the wing or near the vertical stabilizer. The ELT and mounting bracket should
be mounted in the aircraft as close as the antenna as practicable with a coaxial
cable towards the antenna as short as possible. The remote control panel
(1)
is
installed in the cockpit and connected to the ELT with a 2, 3, 4-wire bundle (not
supplied) according to the type of Remote Control Panel.
Note: (1)
The RCP is optional only if the commands and controls of the
ELT are reachable and visible from the pilot seated position.
(RTCA DO-204A)
: " Equipment control and indicator installed for in-fli-
ght use shall be readily accessible from the cockpit crew position.
The cockpit crew shall have an unobstructed view of visual indicator
when in the normal seated position
."
B. Transmitter and bracket
The ELT must be installed into one of the approved mounting brackets.
It may be installed on its standard mounting bracket or on a Universal Mounting
Bracket to re-use existing drilling for retrofit.
Refer to Section 12. Compatibility list for INTEGRA ELTs System, page 53 for
Part Numbers of approved mounting brackets.
The bracket installed near the tail is designed to fix the ELT with a Velcro®
strap. This enables quick removal of the ELT for maintenance or exchange.
Figure 2: INTEGRA ELT with Mounting Bracket