background image

Installation

Manual

Version 1.3

• W A R  N I N G •

Please refer to the System Installation Manual for information on

limitations regarding product use and function and information on

the limitations as to liability of the manufacturer.

Long Range RF Transmitter

How to contact us:

Technical Support

If you have questions or problems when using this product, you can
call Technical Support. If you are within the United States or Canada,
you can get support by dialing 1-800-387-3630.

Internet

Visit the DSC website. You can search the DSC site and read
information about our new products. You  can also  send us any
questions you may have. Our address is 

www.dsc.com

.

©2002 Digital Security Controls Ltd.
Toronto, Canada  •  

www.dsc.com

Printed in Canada   29034465 R002

Direct all comments and sugges-
tions concerning DSC publications
to 

[email protected]

Installation

Manual

Version 1.3

• W A R  N I N G •

Please refer to the System Installation Manual for information on

limitations regarding product use and function and information on

the limitations as to liability of the manufacturer.

Long Range RF Transmitter

How to contact us:

Technical Support

If you have questions or problems when using this product, you can
call Technical Support. If you are within the United States or Canada,
you can get support by dialing 1-800-387-3630.

Internet

Visit the DSC website. You can search the DSC site and read
information about our new products. You  can also  send us any
questions you may have. Our address is 

www.dsc.com

.

©2002 Digital Security Controls Ltd.
Toronto, Canada  •  

www.dsc.com

Printed in Canada   29034465 R002

Direct all comments and sugges-
tions concerning DSC publications
to 

[email protected]

Содержание Links2450











Отзывы: