Kanga PW628, Руководство оператора

Страница: 7 / 69

6
WARRANTY REGISTRATION CARD
Once you have Read the Warranty section of this Manual please complete the Warranty
Registration Form
below. And check the details then return within 30 days of the delivery date to
the address as indicated below the respective country of purchase on the Registration Form.
Owner: Phone: ( )
Address: Mobile:
Town/City: Fax: ( )
Country: Post Code:
Delivery Date: KANGA SERIAL NO:
Email:
Kanga Agent/Sales Person:
I (The Purchaser) have read and fully understand the Operator’s Manual, Safety Instructions
and warranty conditions.
Warranty will only be accepted if this Certi fi cate is completed and returned to:
AUSTRALIA:
KANGA LOADERS, PO Box 4068, Loganholme QLD 4129
Email: service@kangaloader.com
Date:
…… / …… / ……….
Purchaser’s Signature:
……………………………………………………………………..
DEALER STAMP
7
VISUAL CHECK
1. Damage.
2. Loose bolts/nuts.
3. Rust.
4. Leakage oil or water.
5. Wiring / oil cooler connection.
6. Paint work
7. Any untidy weld spots or runs.
8. Check of fi ttings alignment.
9. Is Loader clean and tidy?
10. Are pipes and hoses clear of parts on Loaders?
11. Are Hershel plugs clear of tank & hydraulic lift tubes?
SERVICE
1. Tie down lugs fi tted on body.
2. Correct Attachment Plate/ operation ok with test jig.
3. Lubricate Loader, grease all linkages.
4. All pins and bushes fi tted and tight.
5. Belt tension fan/alternator.
6. Wheel condition/wheel nuts been tensioned 100 ft-lb.
7. Is the track slot forward and tyre direction correct?
8. Is the tyre pressure to speci fi cation?
9. Radiator core, hoses and fi ttings.
10. Air element and hose clearance and connections tight.
11. Sediment in fuel fi lter/tank (drain fuel tank).
12. Is engine EPA compliant?
13 Is PTO direction correct?
14. Has valve tag been removed?
15. Are QRCs correctly aligned and covers fi tted?
16. Spare key fi tted correctly to machine.
17. Ensure battery is secure and boot is on alternator.
18. Is the Splash Plate fi tted?
19. Check oil cooler connection to fan.
20. Ensure control knobs are not split and are secured.
21. Is the Control Knob on Trencher Valve clear of guard?
OPERATIONAL CHECK
1. Gauges/switches and connections/dash lights.
2. Attachment Plate.
3. Throttle Lever (not too tight or loose).
4. Levers and linkages working correctly.
5. Unusual noises or vibrations.
6. Petrol/ Diesel engine Idle 1350-1450 / 900-1000rpm.
7. Petrol/ Diesel engine
max
3550-3650 / 3800-3850rpm.
8. Is Loader easy to start?
9. Is Hour Meter working? Test time = hrs.
10. Check that lift cylinder stops in correct position.
11. Aux stop cable, check cable length is correct & test
operation 5 times.
GUIDANCE
1. Correct stickers applied (UK C/E sticker).
2. Correct Tyre Pressure sticker attached.
3. Identi fi cation Plate -(correct number stamped).
4. Safety/Operating Manual/DVD.
5. Engine Manual (Honda Warranty Form).
FLUID COMPARTMENT CHECK
1. Battery condition.
2. Engine oil level.
3. Hydraulic oil level.
4. Fuel level.
5. Inspect fuel tanks for leaks.
6. Hydraulic fi lter housing directions and elements tight.
7. Radiator water level (Diesel).
OTHER
1. Is the “Passed By” sticker attached and signed?
2. Check machine to be shipped against order.
3. Is the Loader ready for despatch?
4. Ensure diesel Loader has oil funnel.
5. Have back protection bars been ordered and fi tted?.
6. Lights/Beacon operational (Where Fitted).
7. Horn/ Reverse beeper operational (Where Fitted).
8. Rear Legs Operational (Where Fitted).
LOADER CHECKLIST
MODEL:
SERIAL No.:
ENGINE No.:
INSPECTOR’S NAME:
MACHINE BUILT BY:
DATE:
“Received the above Loader, attachments and documentation as stated above in good condition. The correct operation of the
Loader has been explained to our satisfaction. We understand that this Loader should be operated by a properly trained operator.
We are aware that the use of this Loader in any manner or place for which it is not designed will render it unsafe.”
DISTRIBUTOR’S NAME: INSPECTOR’S SIGNATURE: