Vestil PEL-100 Скачать руководство пользователя

Страница: 1 / 17

Rev. 10/3/2019

PEL, MANUAL

Page 1 of 17

PEL-Series Pallet Handlers

Instruction Manual

Receiving instructions:

After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the packaging and

maintains the orientation of the product in the packaging; then inspect the product closely to determine whether it

sustained damage during transport.

If damage is discovered during the inspection, immediately record a

complete description of the damage on the bill of lading

. If the product is undamaged, discard the packaging.

Notes:

1) Compliance with laws, regulations, codes, and mandatory standards enforced in the location where the product is

used

is exclusively the responsibility of the end-user.

2) VESTIL is

not liable

for any injury or property damage that occurs as a consequence of failing to apply either:

a) Instructions in this manual; or b) information provided on product labels.

Vestil Manufacturing Corp.

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868

Fax: (260) 665-1339

Web:

www.vestilmfg.com

e-mail:

[email protected]

Table of Contents:

Signal Words……………………………………………..……………………………………………………………..………….. 2

Safe Use Recommendations……………..……………………………………………..…………………………..…….……… 2

Specifications…………………………………..…………………………………………………………..………………………. 3

FIG. 1: PEL-88 & PEL-100 exploded parts diagram & bill of materials…………..……………………………..………...

4, 5

FIG. 2: PEL-88-A & PEL-100-A exploded parts diagram & bill of materials………………………………………………… 6

FIG. 3: PEL-400-57 & PEL-400-72 exploded parts diagram & bill of materials………...………………….……………..

7, 8

FIG. 4: PEL-100-A-SWA exploded parts diagram and bill of materials………………………………………………………

Accessory carriage attachments………………………………………………………………………………………………… 10

Installing accessory carriage attachments……………………………………………………………………………………... 10

FIG. 5: Electrical circuit diagram………………………………………………………………………………………………… 11

Operation Instructions……………………………………………………………………………………………………………. 12

Chain tension adjustment procedure (PEL-88 & PEL-100)………………………………………………..………………… 12

Chain tension adjustment procedure (PEL-400-57 & PEL-400-72)…………………………………………………………. 13

Battery Charger Operation………………………………………………………………………………………………………. 14

Inspections & Maintenance……………………………………………………………………………………………………… 15

Labeling Diagram…………….....………………………………………………………………………………………………… 16

Limited Warranty…...…………………………………………………………………………………………………………..…. 17

Aluminum models

(PEL-88-A & PEL-100-A)

Steel models

(PEL-88, PEL-100, & PEL-400)

Содержание PEL-100
















Результаты поиска

Содержание PEL-100

Отзывы:

Похожие инструкции для PEL-100

Бренды по названию

Популярные бренды

Vestil PEL-100, Инструкция по эксплуатации

Результаты поиска

Содержание PEL-100

Отзывы:

Похожие инструкции для PEL-100

Бренды по названию

Популярные бренды