Kanga PW628, Руководство оператора

Страница: 29 / 69

29
BEFORE STARTING
Check the fuel level and fi ll up if necessary. Ensure that the fuel is the correct type, free from
impurities or water. Check that both the crankcase oil and hydraulic oil levels are within
operating limits.
NOTE:
Ensure The Auxiliary Power Lever (3) has automatically returned to the “Engine Start”
position from the “Work” position If this lever is not in neutral, the engine will attempt to start under
full load. This will place strain on the starter motor potentially
fl attening the battery.
STARTING
Refer to the engine manual for correct throttle (7) starting positions in warm and cold conditions.
Turn starter key switch to start engine.
CAUTION: Check that all control levers below are in the neutral centre position.
CAUTION: Do not move any of the control levers unless standing with both feet
on the driving platform and holding the grip handles, ensuring non-operating
personnel are clear of the Loader.
CAUTION: First time users to use slow 1/3 throttle to practice safe operation
before commencing work. The recommended normal operating speed of the
machine is 2/3 to
¾ Throttle.
CAUTION: The Kanga Loader is not fi tted with a “seat belt”. The standing
position is a safety feature which allows a quick exit from the machine in case
of an emergency. Do not add a restriction system to the machine which will
limit your ability to safely exit from the Kanga Loader.
CAUTION: Always exercise care when operating on slopes. The Kanga Loader
is approximately 1 meter (39”) wide, which is a great bene fi t for providing
access to con fi ned spaces, however, the machine may become unstable if
operating across a slope. If it is impossible to avoid crossing a slope keep the
load close to the ground and travel at reduced speed.
The maximum safe angle of slope is 20°. This angle is a recommendation
only. The actual safe slope angle will depend on site conditions, operator
experience and activity.
OPERATING INSTRUCTIONS