Kanga PW628, Руководство оператора

Страница: 31 / 69

30
CONTROLS
On the top face of the KANGA Loader are Six spring centred levers which control the basic
functions. The table below indicates the levers with their corresponding functions:
LEVER PUSH PULL
1 4 in 1 Open 4 in 1 Close
3 Aux Reverse Aux Forward
2 Lower Arm Raise Arm
4 Left Drive Forward Left Drive Backward
5 Right Drive Forward Right Drive Backward
6 Tilt Forwards Tilt Backwards
7 Up Throttle Increase Down Throttle Decrease
8 Choke Off Choke On
MANOEUVERING
The forward and reverse levers should be thought of as softly operated
clutches for engaging and disengaging the wheels. Use slow even
movements of the control levers for smooth operation of the Loader.
Practice slow starts and gentle stops in an open, safe area.
Manoeuvring is made possible by individual controls for the hydraulic
motors on each side of the machine. A turn may be achieved by varying
the amount and/or direction of power supplied to each side of the
machine. The machine is capable of turning in its own length by applying
equal forward and reverse power to opposite sides of the machine.
While moving forward, a gentle turn to the left for instance, can be made
by slightly increasing the power to the right hand side or by reducing the
power to the left hand side of the machine. This mode of steering allows
the type of turn to be chosen to suit the situation.
CAUTION: Always ensure that the attachment Locking
Pins are fully engaged at all times.
1 2 4
3
5 6
7 8
31
PARKING AND SHUTDOWN
When parking the Kanga always select level ground and lower any bucket or attachment fi tted fully
to the ground. To shut down, reduce the engine speed to idle and turn the key to the off position.
Remove the key to prevent unauthorised use.
• When loading/unloading the Kanga from the trailer, it is important that the trailer remains
attached to the towing vehicle on a fi rm even surface.
• Do not unload a trailer on a slope.
• Ensure bystanders are suf
fi ciently clear.
• All loading/unloading to be carried out using a ramp must be done at a slow speed, with due
care for personal safety and damage to equipment. Practice the manoeuvres fi rst on fl at
ground if necessary.
• Use appropriately rated slings and shackles, and attach to the lifting point on the top of the
machine when lifting the machine.
• Always use the tie down points on each side of the machine to secure the Loader
when transporting.
• Always use witches hats, signage and traf fi c signals to control the unloading/loading zone,
particularly when in close proximity to operational roads.
CAUTION: Do not park or leave the machine on steep slopes.
KANGA
Mid Range
1500Kg (MAX)
Load on Lifting Lug.
DE-000733