manualshive.com logo in svg

Kampmann KaCool D AF, Инструкция по установке и эксплуатации

Поделиться
Скачать
Kampmann KaCool D AF Скачать руководство пользователя страница 96

96

.

3.25

  KaCool D AF – 

Comfortable feeling of well-being, thanks to AtmosFeel

Chilled water air conditioning system

Installation and operating instructions

9   Faults

 

 

The following chapter describes possible causes of faults and 

the work needed to rectify them.  

Should faults occur frequently, shorten the maintenance 

intervals in line with the actual loading on the unit. 

Contact the manufacturer with any faults that cannot be 

rectified using the following information (  Chapter 1.4 

“Customer service” on page 6).

Behaviour in the event of faults

 

 

The following applies:

  

1.     Immediately switch off the unit with faults that pose an 

immediate danger to persons or property.

2.     Determine the cause of the fault.

3.     Switch off the unit and prevent it from being 

reconnected if rectifying the fault requires work in the 

hazard area. Immediately advise a supervisor on site 

about the fault.

4.     Either rectify the fault yourself or have it repaired by 

authorised personnel, depending on the nature of the 

fault.

9.1   Fault display

 

 

The KaControl displays error messages. First read the separate 

instructions for the room control unit.

The fault table (  Chapter 9.2 "Fault table" on page 

97) provides information on who is authorised to 

rectify and remedy faults.

Содержание KaCool D AF









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды