Kampmann KaCool D AF Скачать руководство пользователя страница 8

Страница: 8 / 104

3.25

KaCool D AF –

Comfortable feeling of well-being, thanks to AtmosFeel

Chilled water air conditioning system

Installation and operating instructions

2.3. Fundamental dangers

The following section lists residual risks that can be generated

by the unit even when operated as intended.

Observe the following safety instructions and the safety

information in the other sections of this manual to reduce the

risk of injury and damage to property and avoid dangerous

situations.

WARNING!
Warning of misuse!

Never operate the unit in humid areas, such as

swimming pools, wet areas etc.

Never operate the unit in rooms with an

explosive atmosphere.

Never operate the unit in rooms with a high dust

content.

Never operate the unit in rooms that contain

high-temperature gases.

Never operate the unit in aggressive or corrosive

atmospheres (e.g. sea air).

Never operate the unit above electrical

equipment, such as switch cabinets, computers

or other electrical units, or contacts that are not

drip-proof.

Never operate the unit outdoors.

Keep windows closed during operation.

Only operate the unit fully assembled and

connected to the relevant supply networks

(waste water, heating/cooling, electricity).

Never operate the unit beyond its technical

specification ( Chapter 3 “Technical data” on

page 12).

Install the unit away from heaters or other

heating equipment.

Ensure that the airflow can circulate freely.

Never place any objects on the unit.

Never cover the unit.

Always note the requirements for the

installation site ( Chapter 6.1 “Requirements

governing the installation site” on page 27).

Содержание KaCool D AF









































































































Результаты поиска

Содержание KaCool D AF

Отзывы:

Бренды по названию

Популярные бренды

Kampmann KaCool D AF, Инструкция по установке и эксплуатации

Результаты поиска

Содержание KaCool D AF

Отзывы:

Бренды по названию

Популярные бренды