Kaliburn SR-100i Скачать руководство пользователя | Manualshive

Страница: 3 / 75

background image

SR-100i User’s Manual

Limited Warranty

KALIBURN expressly warrants that this product shall be free from defects in
materials and workmanship, under proper and normal use for the intended
function of such equipment, for a period of one (1) year for the SR-100i torch and
leads and three (3) years for the SR-100i power supply. This product is intended
for commercial use and is not intended for personal, family, or household
purposes. There are no warranties that extend beyond the description on the face
hereof.

All other warranties, either expressed or implied, including any

implied warranty of merchantability or fitness for any particular purpose,
are expressly excluded.

If this product or any component thereof is determined to be defective in
manufacture, KALIBURN will repair or replace the defective component or
product. The buyer’s remedies are limited to the return of the product for repair
or replacement of any non-conforming product or part at the sole discretion of
KALIBURN. No freight charges of any kind are covered under this warranty.
All returned goods shall be at the buyer’s risk and expense. Beyond this remedy,
KALIBURN will not be responsible for any special, incidental or consequential
damages or injury to the person or property of anyone by reason of any defect in
any equipment sold hereunder.

This warranty will be considered void if torches or torch
consumables manufactured by anyone other than
KALIBURN are incorporated into this product.

Returned Goods Procedure

KALIBURN utilizes a returned goods procedure that must be followed before
returning any items for repair, replacement, or restocking. This means that a
returned goods authorization number must be obtained prior to shipment to
KALIBURN. It will be necessary for the customer to provide a description, along
with the stock number and serial number, if applicable, of the item to be returned.
In no case will KALIBURN accept a returned shipment without the proper
returned goods authorization number.

«
1
2
3
4
5
...
»

Содержание SR-100i












































































Отзывы:

Нет отзывов

Похожие инструкции для SR-100i

Бренд: GE Страницы: 2

Spacemaker 7-5400

Бренд: GE Страницы: 12

Passport 500 Pro

Бренд: Fender Страницы: 4

Бренд: BlitzRotary Страницы: 41

Бренд: WeldKing Страницы: 31

Intellex DV16000

Бренд: American Dynamics Страницы: 201

weldmatic 350i CP139-2

Бренд: WIA Страницы: 28

Бренд: Eco Страницы: 10

Бренд: iLive Страницы: 16

Бренд: Unimig Страницы: 14

PRECISION TIG 185

Бренд: Lincoln Electric Страницы: 104

Бренд: Teac Страницы: 60

Бренд: ECO Schulte Страницы: 18

POWER WAVE AC/DC

Бренд: Lincoln Electric Страницы: 48

Бренд: Ravaglioli Страницы: 72

Бренд: JBL Страницы: 2

Бренд: WELDY Страницы: 44

Hydro-Guard HG-4

Бренд: Mueller Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды