Spirit200a User’s Manual Rev J
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
R
EVISION
H
ISTORY
Rev
ECO#
Author
Date
Description of Change
A
-
As released
B
-
05/08/07
Changed location of coolant level switch
C
-
05/23//07
Changed 30A mild steel preflow pressure from 30 to 35
psi
D
-
07/02/07
•
Changed cutting charts to have separate metric and
imperial versions.
•
Changed 575V control xfmr part number to 706205
E
-
10/15/07
Added PAR relay in series with surge injection circuit to
schematic and parts list
F
-
10/21/09
Section Updates:
•
Contents
•
Section 2
•
Section 3
•
Section 7
•
Section 8
G
-
10/25/10
Section Updates:
•
Contents
•
Section 3
•
Section 4
•
Section 5
•
Section 6
•
Section 7
•
Section 8
•
Appendix A
•
Appendix B - deleted
H
05/10/2011
Section Updates:
•
Max Input Pressure changed to 145 psi in: 2-4, 3-1,
3-13, 3-14, 8-8
•
AGC fan added to drawings in: 3-1, 3-13
•
Postflow label changed in 8-9
I
08/01/2012
•
Section1, added pointers to Section 7.
•
Section 4, corrected cut chart for
Aluminum/70amp/Air Plasma/Nitro Shield.
•
Section 7, added chopper warning.
•
Section 8, updated drawing of power supply
microprocessor board.
J
10/15/2012
•
Added Quick-Disconnect Torch information
throughout manual.
•
Section 7, defective flow switch (25 blinks).
This documentation may not be copied, photocopied, reproduced, translated, or reduced to
any electronic medium or machine-readable format without explicit written permission from
Kaliburn.
4130 Carolina Commerce Parkway
Ladson, SC 29456 USA
(843) 695-4000 - Phone
(843) 695-4001 - Fax
www.kaliburn.net
