Kaliburn FineLine 200PC, Руководство пользователя

Страница: 94 / 175

Automatic Gas Console Advanced Functions FineLine 200PC User’s Manual
Setting the Default Delay Parameter
As previously mentioned, the pierce delay time is usually adjusted such that the
cutting arc fully penetrates the workpiece before the motion output signal is
generated. If the pierce delay time is set via the x/y machine controller, the
Default Delay parameter on the FineLine must be disabled. When the Default
Delay parameter is enabled, a pierce delay time is automatically retrieved after a
material type and thickness are entered. Note that when the Default Delay
parameter is disabled, the present Pierce Delay Time will be used for all cutting
conditions. Make sure the Pierce Delay Value is set to zero (or another chosen
value) after the Default Delay parameter is disabled. To view the status of the
Default Delay parameter, scroll down to the Default Delay selection on the
maintenance screen and press ENT. The default delay screen will be displayed as
shown in Figure 5-13. Pressing F3 will toggle the Default Delay parameter
between enabled and disabled.
Figure 5-13 Default Pierce Delay Screen
5-14