Kaliburn FineLine 200PC, Руководство пользователя

Страница: 14 / 175

Safety FineLine 200PC User’s Manual
•
Clear the compressed gas cylinder connection point by opening the valve
momentarily prior to installing a regulator.
•
Never lubricate compressed gas cylinder valves or pressure regulators with
any type of oil or grease.
•
Never use a compressed gas cylinder or pressure regulator for any purpose
other than which it is intended.
•
Never use a pressure regulator for any gas other than which it is intended.
•
Never use a pressure regulator that is leaking or has other signs of physical
damage.
•
Never use oxygen hoses and pressure regulators for any gas other than
oxygen.
•
Never use any gas hose that is leaking or has other signs of physical damage.
Health Support Equipment
The FineLine 200PC system creates electric and magnetic fields that may
interfere with certain types of health support equipment, such as pacemakers.
Any person who uses a pacemaker or similar item should consult a doctor before
operating, observing, maintaining, or servicing the FineLine system. Observe the
following guidelines to minimize exposure to these electric and magnetic fields:
•
Stay as far away from the FineLine power supply, torch, torch leads, and
remote high frequency console as possible.
•
Route the torch leads as close as possible to the work ground cable.
•
Never place your body between the torch leads and work ground cable. Keep
the work ground cable and the torch leads on the same side of your body.
•
Never stand in the center of a coiled up set of torch leads or work ground
cable.
Safety Standards Booklet Index
For further information concerning safety practices to be exercised with plasma
arc cutting equipment, please refer to the following publications:
1.
AWS Standard AWN, Arc Welding and Cutting Noise , obtainable from the
American Welding Society, 550 NW LeJeune Road, Miami, FL 33126.
2.
AWS Standard C5.2, Recommended Practices for Plasma Arc Cutting ,
obtainable from the American Welding Society, 550 NW LeJeune Road,
Miami, FL 33126.
3.
AWS Standard FSW, Fire Safety in Welding and Cutting , obtainable from
the American Welding Society, 550 NW LeJeune Road, Miami, FL 33126.
1-4