Kalenji SW Kalenji 900, Руководство пользователя

Страница: 12 / 204

16 17
EN
When the stopwatch is running, you can display successive split times and lap times on their
respective lines by successively pressing the
SPLIT/LAP button.
The split time counter will be incremented each time you press the button.
Once you reach the fi gure 299, the counter fl ashes to show that the memory is full.
The word
FULL appears on the display.
When you stop the stopwatch ( START/STOP ), a fi nal lap time is added to the memory.
7.3 Using the memory
When using the stopwatch, the fi rst 299 split times and lap times are saved in the memory. They can
be viewed whether the stopwatch is running or not, by pressing the
RECALL button.
The order in which the information is displayed changes depending on whether the
stopwatch is running or not.
• If the stopwatch is running:
Press
RECALL successively to display the saved times one after the other in the following order:
- The fastest lap time ( FAST )
- The slowest lap time ( SLOW )
- The average lap time over the X saved times ( AVG )
- The last lap time (x)
- The second last lap time (x-1)
...
- the fi rst lap time (1)
• If the stopwatch is not running:
Press
RECALL successively to display the saved times one after the other in the following order:
- The fastest lap time ( FAST )
- The slowest lap time ( SLOW )
- The average lap time over the X saved times ( AVG )
- The FIRST lap time (1)
- The SECOND lap time (2)
...
- The second last lap time (x-1)
- The last lap time (x)
8 / Speed calculation mode (SPEED)
Time elapsed
Counter
Lap time
Distance set, then
speed when in
operation
8.1 Setting the distance
Carry out the same process for all the distance fi gures. The point between the fi gures represents the
decimal point. 1.435 corresponds to 1.435 km or 1.435 miles.
Once all the settings are completed, press
RECALL to exit the settings mode.
8.2 Operation in Speed Mode
Set the distance to be measured in advance.
The stopwatch is started/stopped by pressing the
START/STOP button. You can add several times to
each other by pressing START/STOP again between each time.