KAKA Industrial BS-126G, Инструкция по сборке и эксплуатации

Страница: 11 / 20

the components are installed correctly and are functioning properly.
B. Make sure, before operating the machine, that the screws of the guards and other
protective devices are adequately secured, especially the screws of bow guard.
C. Check that the safety micro switches and the emergency button are functioning
correctly. Test them during a ladles machine cycle.
D. Make sure that the mobile guard does not leave uncovered an angle of more than 5°
in order to prevent fingers from entering.
E. Pay attention to environmental conditions. Do not expose the machine to rain, to mot
use it in damp environments, and position the machine on a clean dry floor that has
no oil or grease stains.
F. Before using the machine, the operator should make sure that all tools and service
spanners used for maintenance or adjustment have been removed.
8.5 GENERAL SAFETY RULES
A. Wear appropriate clothing. The operator’s clothing should not be loose or dangling
nor should it have parts which could easily get caught. Sleeves should contain elastic.
Belts, rings or chains should not be worn. Long hair should be kept in a net.
B. Avoid unstable operating positions. Find safe and evenly balanced position to
operate the machine.
C. Keep the work area tidy, untidiness increases the risk of accidents.
D. Do not use the power supply cable to disconnect the plug from the socket. Protect the
cable from high temperatures, oil or sharp edges. For outdoor use, only use
extension cables that are in line with current regulations.
8.6 MEASURES TO PREVENT RESIDUAL RISKS
A. The removal of guards and tampering with the safety devices is strictly forbidden.
B. Gloves should always be worn.
C. Standard work clothing should be used and kept closed and should not have flapping
parts.
D. The machine should not be cleaned with liquids under pressure.
E. In the event of fire, extinguishers should not be used unless they are the powder type.
The electric power supply to the machine should always be disconnected in these
circumstances.
F. Do not insert foreign bodies into the motor cover and to not supply the machine with