KAKA Industrial BS-126G, Инструкция по сборке и эксплуатации

Страница: 13 / 20

and secure the nuts again. The front blade guides must be positioned the nearest
possible to the piece to be cut. Check every 3 months the existing tolerance between the
blade guides, making sure that it does not exceed the blade thickness of one tenth of a
millimeter, so as to avoid inexactnesses in the cut squaring. Periodically check with
mounted blade that the blade guide bearings rotate freely.
B. Lubrication of mobile parts of piece locking vice
Remove jaw 137 (draw. 4/5 ENCL.3), withdraw vice 132 completely by lowering the lever
136. Clean and grease the mobile parts of the counter-vice 115 and vice 132-133. In
case of sliding difficulties or play the clamp guides carry out the following operations:
loosen nut 141, adjust dowel 140 and secure nut 141. Lubricate the band guide devices
regularly.
C. Cleaning of the coolant tank
The coolant tank can be cleaned by simply removing the crucible 104 (DRAW.1 ENCL.1).
Empty the coolant from the tank and collect the coolant in a container for future disposal.
Clean away the shavings and the metallic powder, taking care not to scatter this over the
machine especially around the motor and the box containing the electrical equipment.
Fill the tank with the amount and liquid stated earlier.
D. Checking of bench lever functioning
Check regularly that the rotation release-locking lever is working properly. In the event of
the lever not locking correctly, loosen grub screw 156(draw.4 Encl.3), tighten nut 114 and
fasten grub screw 156 again. Make sure that with the bench lever in position D, arm 109
which supports the bow, can rotate freely.
10. INFORMATION REGARDING ENVIRONMENTAL NOISE
An environmental noise test carried out on the band saw machine, identical to the
machine to which these operation instructions refer, has given the following results:
ACOUSTIC RADIATION PRESSURE
1. L
Aeq
=83,2 dB (A)
2. L
Aeq
=90.6 dB (the maximum acceptable value is 140dB).
3. The level of background noise has no influence = 48.5-54.2 dB (A).