Kaco blueplanet gridsave 92.0 TL3-S, Руководство пользователя

Страница: 9 / 93

3 Device description
3.1 Function
An external EMS/PMS
2
is required to operate the device. The EMS/PMS must be provided by the customer/
system integrator. Modbus TCP is the sole means of communication with the device.
The necessary commands and data points are described in the SunSpec Protocol description [See sec-
tion 1.1
} Page 4].
The shutdown threshold (DC-Min.) is dynamically determined by the device on the basis of the current grid
voltage. After shutting down the device, it is therefore not possible to guarantee reconnection as there may be
a change in the grid voltage.
3.2 Structure of the device
1
3
5
6
8 7
4
2
Fig. 3: Device diagram
key
1 Housing 5 AC-Connection/ cable feed-through
2 Cover 6 interface / cable feed-through
3 Status indicator 7 Communication - button / USB port
4 Upper cover 8 DC connection / cable feed-through
3.2.1 Electrical functions
A potential-free relay contact is integrated into the device. Use this contact for one of the following functions:
Fault signal relay
The potential-free relay contact closes as soon as there is a fault during operation. You use this function, for ex-
ample, to signal a fault visually or acoustically.
2
Energy management system/power management system
Manual Device description | 3
blueplanet gridsave 92.0 TL3-S blueplanet gridsave 110 TL3-S blueplanet gridsave 137 TL3-S
Page 9
EN-US