4. Set the device upright with the base section and side sections.
5. Remove the uppermost side section and base section from the device.
ð
If the device is in the correct installation position: Proceed with the installation of the mount.
6.3
Fastening the mount
WARNING
Hazard when using unsuitable fixing materials!
If unsuitable fixing materials are used, the device could fall and persons in front of the device may be seriously
injured.
1. Use only fixing materials that are suitable for the mounting base. The fastening materials supplied are only
to be used for masonry and concrete.
2. Only install the device in an upright hanging position.
D
A
C
A
B
1
2
3
4
5
6
6 1/32"
2 61/64"
5
Detail A
A
Fig. 11:
Minimum clearances for wall mounting
1
6
5
10.63 In
18.70 In
18.70 In
10.63 In
1)
1)
41.97 In
18.03 In
21.65 In
17.83 In
2)
1)
1)
60,74 In
Fig. 12:
Wall mounting
Legend
1
Mount
4
Screw for mounting (4x) [SW 13 / [See sec-
tion 6.3
2
Fastening anchors [S12-Ø0.47 In / 0,98 In ]
5
Securing screw (1x)
3
Lock washer
6
Lug to mount the device
A
Minimum clearance: 4.72 In
1)
Minimum clearance excluding device:10.63 In
Recommended clearance: 15.75 In
1)
Recommended clearance excluding device:18.70 In
B
Minimum clearance: 11.81 In
-
-
C
Minimum clearance: 19.69 In
-
-
D
Recommended clearance: 39.37 In
²)
Recommended clearance with DC breaker:60,74 In
↻
Cardboard packaging with mount and mounting kit removed from the packaging and opened.
1. Check condition and minimum room height according to specified dimensional data.
2. Mark the suspension position on the wall surface according to the bore holes in mounting plate.
.
NOTE: The minimum clearances between two devices, or the device and the ceiling/floor have already
been taken into account in the diagram.
3. Fix the mount to the wall using suitable mounting fixtures from the mounting kit.
.
NOTE: Make sure that the mount is oriented correctly.
ð
Proceed with the installation of the device.
6 | Assembly and preparation
Manual
blueplanet gridsave 92.0 TL3-S blueplanet gridsave 110 TL3-S blueplanet gridsave 137 TL3-S
Page 18
EN-US
