Kaco blueplanet 110 TL3, Руководство пользователя

Страница: 18 / 119

Legend
1 Hood 4 Base section
2 Upper side section 5 Lower side section
3 Clip lock (4x) 6 Cardboard packaging with mount and mounting kit
↻ The device is transported to the installation location.
1. Remove the plastic strap from the pallet and packaging.
2. Pull the clip lock off the packaging.
3. Pull the hood upwards to remove it and place the cardboard packaging to one side together with the mount and ac-
cessories.
4. Set the device upright with the base section and side sections.
5. Remove the uppermost side section and base section from the device.
ð
If the device is in the correct installation position: Proceed with the installation of the mount.
6.3 Fastening the mount
WARNING
Hazard when using unsuitable fixing materials!
If unsuitable fixing materials are used, the device could fall and persons in front of the device may be seriously
injured.
1. Use only fixing materials that are suitable for the mounting base. The fastening materials supplied are only
to be used for masonry and concrete.
2. Only install the device in an upright hanging position.
D
A
C
A
B
1
2
3
4
5
6
6 1/32"
2 61/64"
5
Detail A
A
Fig. 16: Minimum clearances for wall mounting
1
6
5
10.63 In
18.70 In
18.70 In
10.63 In
1)
1)
41.97 In
18.03 In
21.65 In
17.83 In
2)
1)
1)
60,74 In
Fig. 17: Wall mounting
Legend
1 Mount 4 Screw for mounting (4x) [SW 13 / [See sec-
tion 6.3
}
Page 18]]
2 Fastening anchors [S12-Ø0.47 In / 0,98 In ] 5 Securing screw (1x)
3 Lock washer 6 Lug to mount the device
A Minimum clearance: 4.72 In
1)
Minimum clearance excluding device:10.63 In
Recommended clearance: 15.75 In
1)
Recommended clearance excluding device:18.70 In
B Minimum clearance: 11.81 In - -
C Minimum clearance: 19.69 In - -
D Recommended clearance: 39.37 In ²) Recommended clearance with DC breaker:60,74 In
6 | Assembly and preparation Manual
KACO blueplanet 110 TL3 KACO blueplanet 125 TL3 Page 18
EN-US