Kaba EX3600, Руководство по эксплуатации

Страница: 9 / 40

9
PROCEDURE 1A - PROGRAM THE (GLOBAL) ACCESS PIN LENGTH
PINs are required for Access users and Manager users in PIN & Card access mode and
also for all Service users since they have only PIN access. Setting the length of Access
PIN must be the first lock programmable function you perform, because all of your other
access PINs (except for the Master) must have the same length. If a user enters a PIN of
a different length, the lock will not accept it. Longer length Access PINs permit a greater
number of PIN combination possibilities, and thus higher security. The Master credential
PIN length must always be 8 digits which cannot be changed.
Required User Level: Master
1. To configure the E-Plex Lock, it must be still in Factory mode before doing any
programming functions at the lock keypad.
Important: This global user PIN length setup and the BHMA Lock Function setup
operations are the only two programmable functions that can be done during the
factory mode using the factory default Master PIN . Changing the factory default
Master PIN to a new Master PIN has to be done here also . For the BHMA Lock
Function setup instructions, please refer to the applicable “E-PLEX Lock Function
Setup Guide” that came with this lock .
2. Put the lock in pushbutton programming mode using the factory Master PIN
(
#12345678#
). The lock responds with a flashing green light. If for some rea-
son 1-2-3-4-5-6-7-8 does not seem to work, please follow the steps for a Hard
Reset
by following the procedure on page 6.
3. Enter the command sequence 009 #LL # , where LL represents the length
(number of digits in a PIN). The range is from 04 to 08 digits. You can leave the
factory default Access PIN length (4 digits) if you wish by not changing the length.
4. Example of Complete Entry:
009#05#
to change the code length to 5 digits.
5. Key in another
#
to indicate the end of programming.
6. From now on, all the user Access PINs you create will have 5 digits length as
setup in step 4 above.