manualshive.com logo in svg

Kaba EX3600, Руководство по эксплуатации

Поделиться
Скачать
Kaba EX3600 Скачать руководство пользователя страница 27

25

 

1. Put the lock into “LearnLok

TM

” Pushbutton Programming Mode -> 

# Master PIN    

 

   (or Manager credential) #

 

2. Enter Command 

498#

 to de-activate all Access and Service users.

 

    Enter a last # to indicate the end of programming.

 

    Example of Complete Entry:

 

    

498# #

. 

 

    

PROCEDURE 17B -  ACTIVATE/DE-ACTIVATE LOCkOUT MODE

The Master user (and only the Master) can perform a global lockout if required, for example 

during a strike or fire, etc.  At times like this you do not want anyone to return to work and 
so you should perform a global lockout temporarily.  The following procedure can either 
de-activate & re-activate all user credentials including the managers (but not the Master 
user) temporarily.

Required User Level: Master  

 

1.  Put the lock into “LearnLok

TM

” Pushbutton Programming Mode -> 

# Master PIN #

 

2. Enter Command 

499#

 to de-activate all users.

 

3. Enter 

1#

 to activate the Global Lockout Mode (or, 

0#

 to de-activate Lockout   

 

 

    Mode).

 

4. Example of Complete Entry to activate Lockout Mode:

  

499#1# # .

 

5. Example of Complete Entry to de-activate Lockout Mode if Lockout was still in  

      

        effect:
  

499#0# # .

Содержание EX3600









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды