manualshive.com logo in svg

Kaba EX3600, Руководство по эксплуатации

Поделиться
Скачать
Kaba EX3600 Скачать руководство пользователя страница 24

22

PROCEDURE 9B - ACTIVATE MANAGER USER CREDENTIAL

A Manager user’s credential should be re-activated if it had been de-activated earlier - 
the procedure is very similar to the above procedure of activating an Access user.

Required User Level: Master 

 

1. Put the lock into “LearnLok

TM

” Pushbutton Programming Mode.

 2. 

Enter Command 

301#

 to re-activate a Manager user’s credential; you do not need 

 

  this person’s PIN and/or card to do this.

 

3.  Enter this user’s ID location (001 through 300); we will use the ID location 015 in 

this example.

 

    Enter a last # to indicate the end of programming.

 

    Example of Complete Entry for user ID=015:

 

    

301#015# #

. 

 

    You have now activated this Manager user’s credential which was temporarily  

 

 

    de-activated.

PROCEDURE 10B - ACTIVATE SERVICE USER CREDENTIAL

A Service user’s credential (PIN) should be re-activated if it had been de-activated earlier - 
the procedure is very similar to the above procedure of activating an Manager or Access 
user.

Required User Level: Master 

 

1. Put the lock into “LearnLok

TM

” Pushbutton Programming Mode -> 

# Master PIN    

 

   (or Manager credential) #

 

2. Enter Command 

302#

 to re-activate a Service user’s credential; you do not need  

          this person’s PIN and/or card to do this.
 

3.  Enter this user’s ID location (001 through 300); we will use the ID location 125 in 

this example.

 

    Enter a last # to indicate the end of programming.

 

    Example of Complete Entry for user ID=125:

 

    

302#125# #

. 

 

    You have now activated this Service user’s credential which was temporarily  

 

 

    de-activated.

PROCEDURE 11B -  ACTIVATE ALL USER CREDENTIALS

You will need to re-activate all regular Access and Service users if you  had de-activated 
them earlier as described in 

Procedure 16B

 temporarily - after a lockout or a strike, for 

example.  After this procedure is executed, all these users will have access to the lock 
again.

Required User Level: Master, Manager 

 

1. Put the lock into “LearnLok

TM

” Pushbutton Programming Mode -> 

# Master PIN    

 

   (or Manager credential) #

Содержание EX3600









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды