35
7. Hold the M-Unit up to the lock at a distance of between 2 inches and 12 inches (5 cm to 20 cm) with the top edge
of the M-Unit parallel to the infrared glass window located above lock code buttons 1 and 2, with the screen
facing upwards.
8. In a few seconds, you will receive a message that the audit has been successful.
9. Continue to the next door on your list and repeat the procedure (Steps 2 to 8) until all the doors have been
audited. If you receive a message that the Communication has failed, repeat the procedure, ensuring that you
are holding the M-Unit in the correct position, pointing straight at the lock lens and at the distance given in Step
7.
10. To check the battery voltage status of any lock after an audit, click on the door ID, and a battery status message
(Good or Replace) appears for that door. It will also display the lock’s firmware version number 3.X
in the
example below.