ENGLISH
71
SETTINGS
SETTINGS
Setting menu items
❏
Displaying the <Settings> menu screen
1
Display
the
<Settings>
screen.
On the Home screen:
KW-V330BT
KW-V430BT
KW-V630BT
KW-V230BT
2
Select the menu category.
• You can change the page to display more items by
pressing
[
]
/
[
]
.
• Only for KW-V230BT : You can also display the
<Settings>
screen by selecting
[SETUP]
on the
pop-up short-cut menu (Page 12).
• You cannot change the
<Audio>
settings screen
in the following situations:
– When the AV source is turned off. (Page 7)
– When the Bluetooth phone is used (making
or receiving a call, during a call, or while voice
dialing).
❏
<Audio> setting screen
<Equalizer>
Change the sound mode or adjust and store the
equalization for each source. (Page 62)
•
Equalizer
: Selects the preset sound mode.
–
Flat
(Initial)
/Hard Rock/Pop/Hip Hop/R&B/
Jazz/Classical/drvn 3/drvn 2/drvn 1/User
•
Q factor
: Adjusts the width of the frequency.
–
1.35
/
1.5
(Initial)/
2.0
•
Bass EXT
: Activates/deactivates bass.
–
ON
/
OFF
(Initial)
•
SW LEVEL
: Adjusts the subwoofer level.
–
–50
to
+10
(Initial:
0
)
<Sound Effect>
Adjust the sound effect.
•
Loudness
: Adjusts loudness.
–
OFF
(Initial)/
Low/High
•
Bass Boost
: Selects the bass boost level.
–
OFF
(Initial)/
Level 1
/
Level 2
/
Level 3
/
Level 4
/
Level 5
•
Volume Link EQ
: You can reduce the driving noise
by raising the bandwidth.
–
OFF
(Initial)/
ON
•
Space Enhancement
*
1
: Virtually enhances the
sound space using the Digital Signal Processor
(DSP) system. Select the enhance level.
–
OFF
(Initial)/
Small
/
Medium
/
Large
•
K2
*
2
: Restores the sound lost due to audio
compression to a realistic sound.
–
OFF
/
ON
(Initial)
•
Sound Response
: Virtually makes the sound more
realistic using the Digital Signal Processor (DSP)
system. Select the sound level.
–
OFF
(Initial)/
Level 1
/
Level 2
/
Level 3
•
Sound Lift
: You can move the center of the sound
to the lower or higher point. Select the height.
–
OFF
(Initial)/
Low
/
Middle
/
High
<Fader/Balance>
Fader
: Adjusts the front and rear speaker output
balance.
•
F15
to
R15
(Initial:
0
)
– When using a two-speaker system, set the fader
to the center (
0
).
Balance
: Adjusts the left and right speaker output
balance.
•
L15
to
R15
(Initial:
0
)
Press [
J
]/[
K
]/[
H
]/[
I
] or drag
[
]
to adjust.
• To clear the adjustment, press
[Center]
.
<Speaker/X’over>
Select the car type/speaker size and adjust the
crossover frequency. (Page 63)
<Time Alignment>
Select the listening position, then adjust the delay
time of the speaker output to create a more suitable
environment for your vehicle. (Page 64)
*
1
You cannot change the setting when
“Tuner”
is selected as the
source.
*
2
This function works only when
“DISC”/
“USB”/
“iPod”/
“Android™”
is selected as the source.
Continued on the next page...
2017̲KW-V̲Entry̲K.indb 71
2017̲KW-V̲Entry̲K.indb 71
2016/12/09 15:11
2016/12/09 15:11
