62
SETTINGS
SETTINGS
Sound adjustment
❏
Using the sound equalization
• The adjustments are memorized for each source
until you adjust the sound again. If the source is
a disc, the adjustments are stored for each of the
following categories.
– DVD/VCD
– CD
– DivX*/MPEG1/MPEG2/MP3/WMA/WAV/AAC/
FLAC
• You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
1
Display
the
<Settings>
screen.
On the Home screen:
KW-V330BT
KW-V430BT
KW-V630BT
KW-V230BT
2
Display
the
<Equalizer>
screen.
3
Select a sound mode
.
• You can also display the
<Equalizer>
screen as
follows:
– For KW-V230BT : Press
[
]
on the source
control screen.
– For KW-V330BT /KW-V430BT /KW-V630BT :
Select
[
]
on the pop-up short-cut menu
(Page 12).
*
Only for KW-V230BT/KW-V330BT Region 4/KW-V630BT.
Storing your own adjustments—Adjusting the
sound precisely
1
Select a sound mode. (See the left column.)
2
Select a band and adjust the level of the
selected band.
• You can adjust the level by dragging the slider
or using [
J
]/[
K
].
• Repeat this step to adjust the level of other
bands.
The adjustments are stored and
<User>
is
activated.
3
Adjust the sound.
<Q factor>
Adjusts the width of the
frequency.
<Bass EXT>
Activates (
[ON]
)/deactivates
(
[OFF]
) bass.
<SW LEVEL>
Adjusts the subwoofer level.*
• To apply the adjusted equalizer to all playback
sources, press
[ALL SRC]
, then press
[OK]
to
confirm.
• To clear the adjustment, press
[EQ INIT]
.
*
Not adjustable when
<None>
is selected for subwoofer on the
<Speaker Select>
screen. (Page 63)
❏
Setting the crossover network mode
Select the appropriate crossover network mode
according to the speaker system (2-way speaker
system or 3-way speaker system).
1
Turn off the AV source. (Page 7)
2
Display
the
<X’over Network>
screen.
Press the following buttons at the same time:
• For KW-V230BT :
and EQ
• For KW-V330BT
: and
• For KW-V430BT /KW-V630BT : FNC and
volume –
3
Select the crossover network mode.
[2way]
Select this when connecting speakers
in a 2-way system (front/rear).
[3way]
Select this when connecting speakers
in a 3-way system (tweeter/mid
range/woofer).
A confirmation message appears. Press
[Yes]
.
2017̲KW-V̲Entry̲K.indb 62
2017̲KW-V̲Entry̲K.indb 62
2016/12/09 15:11
2016/12/09 15:11