Setting the security code
You can set a security code (four-digit number of your
choice) to protect your receiver system against theft.
•
Once you set the security code, you are required to
input the security code if you have disconnected the
unit from the battery.
Enter the security code you have set in step 2, then
touch
[Enter]
when you reconnect the battery.
1
Display the <Security Code Set> screen.
On the Home screen, touch as follows:
Then, on the
<SET-UP>
screen, touch as follows:
[Security]
[Security Code Set]
2
Enter a four-digit number (
1
), then
confirm the entry (
2
).
• To clear the last entry, touch
[BS]
.
• To cancel the setting, touch
[
]
.
3
Enter the four-digit number entered in
step 2 and touch [Enter] again to confirm
your security code.
To change the security code:
Touch
[Security Code
Change]
on the
<Security>
screen on step 1, then
repeat steps 2 and 3.
To clear the security code:
Touch
[Security Code
Cancellation]
on the
<Security>
screen on step 1,
then repeat step 2.
Calendar/clock settings
1
Display the <User Interface> screen.
On the Home screen, touch as follows:
Then, on the
<SET-UP>
screen, touch
[User
Interface]
.
2
Set the date and clock.
E.g. User interface settings screen
Getting Started
Getting Started
[Clock]
Select the method to set the date and clock.
•
RDS-SYNC
(Initial)*1: Synchronizes the clock with
the FM Radio Data System.
•
Manual
: Sets the date and clock manually.
[Time Zone]
*2
Select the time zone for your area.
[Clock Adjust]
*2
Set the date and clock manually when
[Clock]
is
set to
[Manual]
.
Touch
[
J
]
/
[
K
]
to adjust the date (year/month/
date), then clock (hour/minute). To finish setting,
touch
[Set]
.
*1 For KW-M450BT Indonesian models, [Manual] is selected
initially.
*2 Selectable when [Clock] is set to [Manual].
5
ENGLISH
00_EN_KW_M450BT_M.indb 5
00_EN_KW_M450BT_M.indb 5
25/2/2019 1:42:33 PM
25/2/2019 1:42:33 PM
