31
ENGLISH
Settings
Settings
<Equalizer>
The following adjustments are memorized for each
source until you adjust the sound again.
Selecting a preset sound mode
1
Display the preset sound modes.
2
Select a preset sound mode.
• Pop/Hip Hop/R&B/Jazz/Classical/Hard Rock/
Flat
(Initial)
/iPod/User1/User2/User3/User4
To hide the preset sound modes:
Touch
[
]
.
Setting the speakers and crossover
frequency
1
Select a car type (
1
), select a speaker
(
2
) (front speakers, rear speakers, or
subwoofer) to set, then location* and
speaker/tweeter size (
3
) of the selected
speaker.
A selection window appears for each setting. Select
an item, then touch
[Close]
to close the window.
• Repeat steps
2
and
3
to set all speakers.
• Adjustable items vary depending on the selected
speaker type.
• When a speaker is not connected, select
[None]
.
• When setting the front speakers, also select the
speaker size for
<Tweeter>
.
* Speaker location selection is selectable only when <X’over
Network> is set to [2way].
2
Touch [X’over] to display the <X’over>
screen.
3
Select the speaker type (
1
), then adjust
the crossover frequency (
2
) of the
selected speaker.
E.g. When
<X’over Network>
is set to
[2way]
• Adjustable items vary depending on the selected
speaker type/speaker size/crossover settings.
• Speaker types shown on the screen differ
depending on the
<X’over Network>
setting.
<HPF FREQ>
Adjusts the crossover frequency for the front or rear
speakers (high pass filter).
<LPF FREQ>
Adjusts the crossover frequency for the speaker
(low pass filter).
<Slope>
Adjusts the crossover slope.
<Gain>
Adjusts the output volume of the selected speaker.
<TW Gain>
Adjusts the output volume of the tweeter.
<Phase Inversion>
Activates the phase inversion for the speaker.
• To deactivate, touch
[Phase Inversion]
again.
00_EN_KW_M450BT_M.indb 31
00_EN_KW_M450BT_M.indb 31
25/2/2019 1:42:54 PM
25/2/2019 1:42:54 PM
