45
ENGLISH
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
P.CONT
ANT.CONT
Wiring connection
10 A fuse
Connect the antenna cord to the antenna terminal
Purple with white stripe
Light green
To the car’s reverse lamp harness when using the optional rear view camera
Extension parking cable (
ø
)
To the car’s parking brake detection switch harness
(For best safety, be sure to connect the parking sensor.)
*1 Supplied for KW-M450BT Australia and New Zealand
models.
*2 Except for KW-M450BT Australia and New Zealand
models/KW-M450BT Indonesian models.
*3 For 3-way speaker system connection, see page 44.
Installation and Connection
Installation and Connection
White
]
/ White with black stripe
[
Green
]
/ Green with black stripe
[
Gray
]
/ Gray with black stripe
[
Purple
]
/ Purple with black stripe
[
Orange with white stripe
Light blue with yellow stripe
Blue with white stripe (12 V
350 mA)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
To the car light control switch
To rear speakers/tweeters*3 (right)
To front speakers/mid range speakers*3 (right)
To rear speakers/tweeters*3 (left)
To front speakers/mid range speakers*3 (left)
Car battery
Car fuse
To the car chassis
To the OE remote adapter (not supplied) which is compatible with your car
Ignition key switch
To the power control terminal when using the optional power amplifier (Or)
To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna
Gray/Red
Bright green/Red
Purple/Red
Connect to your vehicle’s steering
remote harness.
Contact your JVC dealer for details.
00_EN_KW_M450BT_M.indb 45
00_EN_KW_M450BT_M.indb 45
25/2/2019 1:43:03 PM
25/2/2019 1:43:03 PM